IBC tote stand for 600 l and 1000 l containers SIBS

The top frame and legs are welded from hollow sections: 40×40×3 mm in the economy version, 50×50×3 mm for 600 l totes and 60×60×3 mm for 1000 l totes. A centre beam supports the middle skid of the pallet and four corner stops keep the tote from sliding off. Corner braces instead of floor-level cross members keep the bottom open on all sides, so the container can stand under the valve whichever side it is on. The 120 × 120 mm feet have holes for anchoring. The stand is delivered fully welded and ready to use, powder coated black (RAL 9005); other RAL colours on request.

• SIBS-600-E – 600 l IBC on a 1200 × 800 mm pallet, 1230 × 830 × 1000 mm, 40×40×3 section, 750 kg – for water, rainwater and liquids with a density close to water.
• SIBS-600 – 600 l IBC, 1230 × 830 × 1000 mm, 50×50×3 section, 1000 kg.
• SIBS-600-W – as SIBS-600, with two 200 × 80 mm fork pockets.
• SIBS-1000 – 1000 l IBC on a 1200 × 1000 mm pallet, 1230 × 1030 × 600 mm, 60×60×3 section, 1500 kg – a full tote even with heavier chemicals.
• SIBS-1000-W – as SIBS-1000, with fork pockets.

Choose the stand by the pallet size, not just by the tote volume. A full 1000 l tote of water weighs approx. 1050 kg, with a liquid of density 1.4 approx. 1450 kg.

The stand lifts the tote but does not contain a leak. If the IBC holds a substance hazardous to water, flammable or corrosive, place the stand in a spill pallet with a capacity at least equal to the tote volume – we offer spill pallets for IBCs. Drips while filling are caught by the SIBS-T drip tray (600 × 400 × 120 mm, approx. 22 l) placed under the valve. The user is responsible for the risk assessment and storage method.

A full tote on the stand has a high centre of gravity. Place it on a level, hard floor and anchor it where forklifts operate. Move the stand with fork pockets only with an empty tote.

Fully welded, powder-coated stand with corner stops and feet with anchoring holes; -W versions with 2 fork pockets. The IBC tote, canister, bucket, anchors and spill pallet are not included – they are shown in the visualisations for illustration only.

Gravity dispensing from IBC totes into canisters, buckets and watering cans: production plants, construction chemicals, workshops (operating fluids, AdBlue, cleaning fluids), agriculture (liquid fertilisers, cleaning agents), gardens (rainwater), treatment plants and building sites (process water, concrete admixtures).