Self-tipping skip TK

TK is a versatile self-tipping skip for forklift handling – a tipping container for swarf, scrap, production waste and bulk materials (granulates, sawdust, slag). The series covers 11 capacities from 300 to 4000 litres, with load capacities from 700 to 2000 kg.

• Body made of 3 mm (TK 300–1500) or 4 mm (TK 2000–4000) sheet steel.
• Base made of 4 mm sheet steel with additional stiffening reinforcements.
• Wet painting: anti-corrosion primer and polyurethane topcoat; the smooth surface is easy to clean.
• Standard colour RAL 5010 (blue), other RAL colours to order.

• Front release bumper – simply press it against the edge of the receiving container; the operator stays in the forklift.
• Lever at the rear of the base – operated by hand from ground level or with a steel cable when the skip is raised.

• A stop at the left fork pocket prevents the skip from sliding off the forks.
• A lock at the rear of the base prevents the body from tipping during transport.

On request, we can make the skip in other dimensions, with a different sheet thickness or with additional equipment.

For every size you can order: a lid, gas struts for the lid, a double bottom with sieve, a 3/4″ drain tap (only with the double bottom) and a set of 4 castors (2 swivel with brake + 2 fixed, ø160 or ø200 – matched to the skip size). Option prices are shown once you select a size. The castors raise the skip by approx. 200–245 mm; move a full skip weighing more than 500 kg with a forklift. The version with options is not available from stock – it is made to order.

Skip with 2 compartments. A welded lengthwise divider splits the skip into 2 compartments side by side – e.g. for two kinds of parts or swarf from two machines. When the skip is tipped, both compartments empty together; if the materials must go to different containers, empty one compartment by hand or choose two smaller skips.