Vertical battery charger rack for 1, 2 or 3 chargers SP-02

• Welded frame made of 40×40×2 mm hollow sections (S235), open at the sides and front – good charger ventilation and easy cable access.
• 2 mm perforated steel shelves on section frames, each up to 50 kg.
• Top frame – for hanging a charger or a cable reel.
• Lower bracing; SP-02-2 and SP-02-3 also have rear cross bracing made of 30×5 mm flat bar.
• 100×100 mm anchor plates with M10 floor anchors.
• Plug holder with hook at each shelf, bolted to the front post.
• Powder coating – RAL 5010 as standard, any RAL colour on request.

• SP-02-1 – 425 × 711 × 1197 mm, 1 shelf at 700 mm, load capacity 50 kg, weight approx. 35 kg,
• SP-02-2 – 425 × 711 × 2032 mm, 2 shelves (600 / 1450 mm), load capacity 2 × 50 kg, weight approx. 60 kg,
• SP-02-3 – 425 × 711 × 2845 mm, 3 shelves (500 / 1300 / 2100 mm), load capacity 3 × 50 kg, weight approx. 80 kg.

• With a width of 425 mm, safety is determined by stability, not by shelf capacity. Every version must be bolted to the floor – M10 anchors are included.
• SP-02-3 must additionally be fixed to the wall with the wall bracket included. SP-02-2 also comes with a wall bracket, recommended when installed against a wall.
• The top shelf of SP-02-3 is at 2100 mm – intended for a permanently installed charger, not for daily removal.

• rack with shelves (1, 2 or 3),
• M10 floor anchors (4 pcs),
• plug holder at each shelf,
• SP-02-2 and SP-02-3: wall bracket with plugs.

Chargers, cable reel and cables are not included – they are shown in the visualisations for illustration only.

• battery charging rooms and charging stations for several forklifts and pallet trucks,
• warehouses and halls with limited floor space along the wall,
• logistics centres and production plants with electric truck fleets.

Arm with cable balancer 1–3 kg – available for every version, price per arm. An approx. 500 mm boom made of hollow section is bolted to the top frame of the rack, above the charging station. A spring cable balancer (approx. 2 m cable) hangs at its end: the charger cable with plug stays off the floor and retracts by itself when unplugged. The balancer is meant for the cable with plug only – not for suspending the charger or heavier cables. Select the option on the product page before adding to cart.

We make racks with other heights and shelf spacing, extended shelves, a magnetic cable holder or a spring and cable hanger, in any RAL colour. Lead time: approx. 15 working days. Warranty: 12 months.

• The price applies to the rack ex works, without transport – delivery costs are quoted individually.
• Product images are 3D visualisations.